LiquiStone Casting Material

Liqui-Stone Gypsum Cement is the best positive casting material for most LifeCasting. LiquiStone is white, has a compressive strength of approximately 9,000 psi and sets in 15 minutes with a full cure in 24 hours. It's just about perfect for most LifeCasting projects. Here's why:

• Its a powder that mixes easily with water. Looks the same as Plaster of Paris when mixed.
• It captures an amazing amount of detail in the casting- right down to the fingerprints.
• The white color makes it very easy to apply colored finishes.
• It has a working time of about 12-14 minutes.
• It reaches its working set in about an hour. Unmolding is recommended in between 1 and 3 hours.
• It reaches 95% of its ultimate strength in 24 hours.

The compressive strength of 9000 psi is hard enough that it isn't easily broken, yet soft enough that it can be worked with tools even after fully set. Plaster of Paris is WAAAAAY to soft, having a compressive strength of 800-1200 psi, and breaks very easily. Some gypsum cements on the market have up to 32,500 psi compressive strengths and are much too hard to work with tools. Our experience is that somewhere between 8,000 and 11,000 psi is about right. LiquiStone is our choice.

A typical single hand cast takes about 3 pounds of LiquiStone, a face cast between 1.5 and 2 pounds, and a partial torso casting can take up to 10 pounds.

LiquiStone comes in several package sizes: PURCHASE NOW

LiquiStone also comes packaged in convenient "Mix-In-The-Bag" Packaging as used in the Hand Casting Kit. Mixes easily and cleanup is a SNAP.